Hansen Female Threaded Tee 15mm -100mm BSP

Hansen Female Threaded Tee

Used to tee off three male threads.

True Fit Threaded Fittings Features & Benefits

• Suitable for use above or below ground, in varying operating pressures and temperatures
• Strong, Lightweight and Compact
• Large Range of Durable, High Strength, Commercial Quality True Fit Pipe Fittings
• Manufactured from UV Stabilised High Quality Glass Fibre Reinforced Nylon giving a weather, termite, fungi and bacterial resistance
• Strong, Lightweight and Compact
• Material Approved for use with Potable (drinkable) Water
• An extensive range of fittings in sizes 6mm to 100mm (1/8” to 4”)
• Precision Heavy Duty Tapered Threads give a Strong Reliable Seal
• Material is strong enough to minimise potential cross threading
• Fittings provide flexibility and versatility for new and existing installations, saving on time and money

HTT15 = 15mm x 15mm x 15mm
HTT20 = 20mm x 20mm x 20mm
HTT25 = 25mm x 25mm x 25mm
HTT32 = 32mm x 32mm x 32mm
HTT40 = 40mm x 40mm x 40mm
HTT50 = 50mm x 50mm x 50mm
HTT65 = 65mm x 65mm x 65mm
HTT80 = 80mm x 80mm x 80mm
HTT100 = 100mm x 100mm x 100mm

WRAS Approval
Hansen True Fit Threaded Fittings are approved for use with potable (drinkable) water, and that they will not leach contaminants into the water. The Water Research Council in the UK is the highest recognised water testing organisation in the world and we believe Hansen are the only plastic threaded pipe fitting in Australasia to achieve this standard.

SGS M&I
Hansen True Fit Threaded Fittings from 6mm to 100mm have been approved in SGS Marine Certificate. The M&I division of SGS New Zealand Limited is the country’s largest marine and industrial inspection, testing and Safe Ship Management service provider.

AS/NZS 4020
Hansen True Fit Threaded Fittings from 6mm to 100mm have met the requirements of AS/NZS 4020 Australia & New Zealand drinking water test standard.

Largest range of durable, high strength, commercial quality Threaded Pipe Fittings in the Southern Hemisphere
•Precision Heavy Duty Tapered Threads give a Strong Reliable Seal
•Manufactured from a Raw Material Approved For Use With Potable (drinkable) Water
•Manufactured from High Quality Glass Fibre Reinforced Nylon giving a Weather, Termite, Fungi & Bacteria Resistant
•Common Applications Include Horticultural, Agricultural, Irrigation, Marine & Plumbing
•Material strong enough to minimise potential cross threading
•WRAS - Approval for use with potable (drinkable) water as they will not leach contaminants into the water.
•Suitable for use above or below ground in varying operating pressures and temperatures
•Strong, Lightweight and Compact
•Available in a variety of thread combinations and connections.
•New Zealand Made

Hansen have tested all its products for use with cold water up to a maximum temperature of 60°C (140°F).

We do not recommend the use of these products with temperatures higher than 60°C (140°F) as plastic expands due to temperature increases. Hansen cannot guarantee the products will perform when used with temperatures over 60°C (140°F). Hansen products that have failed in temperatures higher than 60°C (140°F) will not be covered by warranty.